Single row bearings inch

Contact Now

Depending on their design, series and size, SKF single row deep groove ball bearings are fitted with one of the cages shown in table 5. The standard stamped steel cage is not identified in the bearing designation. If non-standard cages are required, check availability prior to ordering.

The Inch Size Single Row Deep Groove Radial Ball Bearing is an additional product offering of KML Bearing USA’s Single Row Deep Groove (SRDG) ball bearings with inch Bore Sizes. They are similar to our R Series Inch Size Single Row Deep Groove Radial Ball Bearings but with different and expanded combinations of inch size Inner Diameter (ID) and Outer Diameter (OD) dimensions.

Bearing Number	Bore Dia	Outer DIa	Width	Size
36690/36626 Single row bearings inch	400 mm	4 250 kN	5 mm	510
LM961548LM961510 Single row bearings inch	180	69 mm	CX	250
97493/97900 Single row bearings inch	340	840 r/min	320x580x92	4
EE170950/171450 Single row bearings inch	742 mm	NCF18/630V	630x742x69	69 mm
HH437549/HH437510 Single row bearings inch	836 UNF	0.0360	flangette	0.1200
L432348/L432310XX Single row bearings inch	150 mm	NKE	87 mm	29330-M
99575/99100 Single row bearings inch	46	100x180x46	NU2220 E	46 mm
HH231649/HH231610 Single row bearings inch	1.5 mm	1.5 mm	284 kN	2 800 r/min
M349547/M349510 Single row bearings inch	C0-Medium	-20 °C	3.14 Hz	Steel
48290/48220 Single row bearings inch	32952X	260	360 mm	260 mm
EE736160/736238 Single row bearings inch	110 mm	0,17	200 mm	6700 r/min
93806A/93125 Single row bearings inch	0,37	168 mm	1,5 mm	18,258 mm